JET-LUBE EZY-TURN BODY FILL H2S is a petroleum oil based sealant suitable for displacing water and foreign material in gate valve body cavities. EZY-TURN BODY FILL H2S should be used in applications where economy is required and hydrocarbon resistance is not a major concern.

  • H2s Inhibited Formula
  • Color: Grey
  • Density: 7.8
  • Specific Gravity: 0.94
  • Organo clay thickener
  • Dropping point: None
  • Nontoxic
  • Pumpable
  • Nonhazardous
  • Corrosion Resistant
  • Displaces Water
  • Mineral Oil Based formula

EZY-Turn™ Body Fill H2S

Gate Valve Lubricant

Ezy-Turn Body Fill


Even though EZY-TURN BODY FILL H2S is petroleum based, field service has shown it has excellent ability to remain in the body cavity. Has good metal adhesion and readily flows into hard-to-fill orifices and channels when pumped with a high pressure lubricator.


EZY-TURN BODY FILL H2Sshould be used in situations where economy is a factor and maximum hydrocarbon resistance is not required. Good for close tolerance valves due to metal adhesion and superior flow properties under pressure.


Apply the Body-Fill H2S to the entire interworking of the valve to coat and protect the valve body and all exposed parts. This formula will protect new machined parts from corrosion and help in the break-in process of the first cycles of the valves. Will also lubricate and protect all rubber and molded composite parts and seals.


Not recommended for use with oxygen or strong oxidizers such as hydrogen peroxide or sulfuric acid.


Code #
Service Rating
Get Assistance
10 lb can
5 gal pail
15 gal drum
50 gal drum
-20°F to 350°F
-29°C to 177°C
MSDS - Material Safety Data
MSDS - Material Safety Data Email for Assitance